| Basic Oxygen Furnace (BOF) | (english) "WHAT A pear-shaped furnace, lined with refractory bricks, that refines molten iron from the blast furnace and scrap into steel. Up to 30% of the charge into the BOF can be scrap, with hot metal accounting for the rest. WHY BOFs, which can refine a heat (batch) of steel in less than 45 minutes, replaced open-hearth furnaces in the 1950s; the latter required five to six hours to process the metal. The BOF's rapid operation, lower cost and ease of control give it a distinct advantage over previous methods. HOW Scrap is dumped into the furnace vessel, followed by the hot metal from the blast furnace. A lance is lowered from above, through which blows a high-pressure stream of oxygen to cause chemical reactions that separate impurities as fumes or slag. Once refined, the liquid steel and slag are poured into separate containers. " |
| Basic Oxygen Process 2 | (english) A steel making process wherein oxygen of the highest purity is blown onto the surface of a bath of molten iron contained in a basic lined and ladle shaped vessel. The melting cycle duration is extremely short with quality comparable to Open Hearth Steel. |
| Batch Anneal | (english) The process by which a large, stationary stack of steel coils (4 coils high) is subjected to a long heat-treating cycle. This process enables the cold-rolled sheet to fully recrystallize into the softest possible product conforming to customer specifications. Controlling the recrystallization process makes a fine-grained microstructure easy to obtain, and minimizes the tendencies for retention of directional properties of the rolled steel which could produce undesirable shapes in the stamping of a cylindrical part such as a can. Also see Anneal and Continuous Anneal. |
| Bath Annealing | (english) Is immersion is a liquid bath (such as molten lead or fused salts) held at an assigned temperature-when a lead bath is used, the process is known as lead annealing. |
| Bazooka | (english) Performs functions of Galvanneal Furnace; set of torches on wheels used to shoot flames onto a strip to further heat it. |
| Bead | (english) 1)Half-round cavity in a mold, or half-round projection or molding on a casting, 2) a single deposit of weld metal produced by fusion. |
| Beam and Sling | (english) Tackle used in conjunction with a crane for turning over the cope or drag of a mold prior to assembly. |
| Bed-In | (english) Method whereby drag may be rammed in the pit or flask without necessity of rolling over. Process used in production of heavy castings. |
| Bedding | (english) Sinking a pattern down into the sand to the desired position and ramming the sand around it. |
| Bench Work | (english) Work done primarily at a bench with hand tools. Occasionlly suplemented by small power-driven tools. |