| Blast Furnace 2 | (english) A vertical shaft type smelting furnace in which an air blast is used, usually hot, for producing pih iron. The furnace is continuous in operation using iron ore, coke, and limestone as raw materials which are charged at the top while the molten iron and slag are collected at the bottom and are tapped out at intervals. |
| Blast Furnace Gas | (english) By-product gas created by the iron making process which is used as fuel for the boilers. |
| Blasting (Blast Cleaning) | (english) A process for cleaning or finishing metal objects by use of an air blast or centrifugal wheel that throws abrasive particles against the surface of the work pieces. Small, irregular particles of steel or iron are used as the abrasive in grit blasting, and steel or iron balls in shot blasting. |
| Blister Steel | (english) High-carbon steel produced by carburizing wrought iron. The bar, originally smooth, is covered with small blisters when removed from the cementation (carburizing) furnace. |
| Bloom 2 | (english) A semi-finished hot rolled product, rectangular in cross section, produced on a blooming mill. For iron and steel, the width is not more than twice the thickness, and the cross-sectional area is usually not less than 36 sq. in. Iron and steel blooms are sometimes made by forging. |
| Blow Down | (english) Process that rids boiler feed water of solids and maintains the proper chemical balance of the feed water. Blow down can also be used to rid drum(s) of excess water. |
| Blowhole 2 | (english) A cavity which was produced during the solidification of metal by evolved gas, which in failing to escape is held in pockets. |
| Blue Print | (english) A pen or ink line drawing reproduced (printed) on sensitized paper by direct exposure. |
| Blush | (english) A coating defect consisting of the whitening of a cured film which results in a translucent or opaque appearance with accompanying loss of gloss. Blushing usually occurs during the pasteurization or steam processing of films which are undercured or water sensitive. |
| Boron Steels | (english) The addition of boron in the range 0.0005-0.005% to certain steels increases the hardenability. A range of boron steels is now listed in the current BS 970 and are widely used for the production of cold headed fastenings. |